Product Description:

The MDD093C-L-030-N2L-110PA1 is a synchronous servo motor from Bosch Rexroth Indramat in the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it provides closed-loop rotary actuation when a controller demands accurate speed and torque. By integrating into automated machine axes, the unit converts electrical command signals into mechanical motion for positioning, feeding, or auxiliary duties in manufacturing cells and processing lines. This operating role supports repeatable starts, stops, and speed changes during cycles that depend on stable servo response.

At a nominal speed of 3000 rpm, the rotor can follow high-frequency command changes without losing synchronization, which is important in applications that require constant velocity under load. Standard balancing minimizes residual vibration so the motor can be coupled to precision gear trains while keeping bearing loads acceptable. A centering diameter of 110 mm locates the motor accurately in mounting flanges, simplifying coaxial alignment with driven elements. The housing is prepared for surface cooling, and position data is returned through digital servo feedback for tight control loops. A blocking brake with a holding torque of 11 Nm secures vertical or suspended loads when power is off. Power and feedback lines connect through a sealed connector, which keeps wiring protected at the motor housing.

All cable exits are on Side A, so cable routing can be kept clear of moving parts and consistent with cabinet bend radii. The single output shaft uses a keyway to transmit torque, and the motor is supplied with a shaft seal that blocks coolant or dust from entering the bearing chamber. The motor has size 093 with the longer C length code, giving a longer housing without increasing the centering pilot. A standard shaft end on the drive side only reduces rear-side overhang and supports compact mounting arrangements.