MDD093C-L-030-N2L-110GL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
25 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-110GL2 is a synchronous motor from the MDD Synchronous Motors series, designed for use with digital drive controllers. It features a nominal speed of 3000 min⁻¹ and has a centering diameter of 110 mm with a plain shaft and standard balancing. This motor includes a blocking brake with a holding torque of 22 Nm and utilizes digital servo feedback for monitoring.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-110GL2 is an AC synchronous servomotor manufactured by Bosch Rexroth Indramat and supplied within the MDD Synchronous Motors series. The motor is intended for digital drive controllers, converting precise electronic commands into regulated rotary motion in production lines, material-handling axes, and assembly robots. Its synchronous design supports smooth torque production across controlled speed ranges, which is useful in indexing, transfer, and positioning tasks. Closed-loop velocity and position regulation allow the controller to maintain accurate motor response under changing industrial loads.
At rated operation, the motor reaches a nominal speed of 3000 rpm, giving the connected drive a fixed velocity reference for motion profiles. A blocking brake integrated on the rear flange can lock the shaft with 22 Nm of static torque, so vertical axes can remain in place during power loss. Electrical and feedback terminations exit on the left side because the connector housing is oriented in that direction. This arrangement can reduce cable crossover in machines where the drive cabinet is mounted to the left of the axis. The motor uses frame size 093 with length code C, which indicates its housing size and active stack length.
A centering recess of 110 mm helps align the motor face with adjoining machine plates for repeatable mounting. Rotor position data is returned through digital servo feedback (DSF), allowing the controller to close high-bandwidth loops without an external encoder. Because the feedback is integrated, the drive can monitor shaft position directly during controlled motion and standstill. The housing is prepared for surface cooling, so mounting it on a cooled plate can increase continuous output without changing the motor footprint. The motor also uses a plain shaft with an installed shaft seal to support pulleys or rigid couplings while limiting lubricant ingress at the bearing seats.
Frequently Asked Questions about MDD093C-L-030-N2L-110GL2:
Q: What type of motor feedback does the MDD093C-L-030-N2L-110GL2 provide?
A: The MDD093C-L-030-N2L-110GL2 motor is equipped with digital servo feedback (DSF) for precise position detection.
Q: What is the holding brake torque of the MDD093C-L-030-N2L-110GL2 motor?
A: This model features a blocking brake with a holding torque of 22 Nm.
Q: What is the connection direction of the MDD093C-L-030-N2L-110GL2 motor?
A: The connection direction for this motor is left, making installation adaptable for specific layouts.
Q: What is the centering diameter size on the MDD093C-L-030-N2L-110GL2 model?
A: The centering diameter of this motor is 110 mm, which affects compatibility with mounting hardware.
Q: What kind of shaft and sealing does the MDD093C-L-030-N2L-110GL2 feature?
A: This motor is designed with a plain shaft and comes equipped with a shaft seal.
