MDD093C-L-030-N2L-110GB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
15 Seconds
The Bosch Rexroth Indramat MDD093C-L-030-N2L-110GB1 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. The motor features a nominal speed of 3000 rpm, a standard plain shaft, and comes with a shaft seal and blocking brake providing 11 Nm of torque. It supports side B connector connections, has a centering diameter of 110 mm, and is built for surface cooling.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-L-030-N2L-110GB1 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers and supplies controlled rotary power to gantries, packaging axes, transfer systems, and general-purpose machine tools that require closed-loop speed and position control. When paired with a compatible Indramat drive, the motor converts regulated phase current into precise torque and motion for automated equipment. This operating principle allows the axis to follow commanded acceleration, deceleration, and holding behavior with consistent repeatability during normal machine cycles.
The motor has a nominal speed of 3000 rpm, allowing continuous operation at a common high-speed operating point for industrial servo applications. A surface-cooled housing transfers heat to the mounting surface, helping keep winding temperature within the permitted range under load and reducing the need for separate forced-air hardware. Accurate mounting is supported by a 110 mm centering register, which helps seat the motor correctly against the machine flange. A blocking brake rated at 11 Nm holds the shaft when power is removed, which is useful where the load must remain in place at standstill. Torque is delivered through a plain shaft, and the opposite end remains closed with no rear shaft extension.
Electrical connection is routed toward Side B of the stator so the motor and feedback cables can run in the same general direction as adjacent machine wiring. Position and velocity signals are provided by digital servo feedback (DSF), which gives the drive the information needed for accurate current, speed, and position control throughout the working range. The output end includes a shaft seal to help protect internal components from contaminants in the installation area. The frame size of 093 keeps the motor compact for its torque class, while motor length code C provides a mid-length stack that balances installation depth and rotor inertia. A molded connector is used for the connection point, giving the housing a compact cable interface.
Frequently Asked Questions about MDD093C-L-030-N2L-110GB1:
Q: Does the MDD093C-L-030-N2L-110GB1 motor include a holding brake?
A: This model comes with a blocking brake that provides a holding torque of 11 Nm.
Q: What kind of feedback system is used in the MDD093C-L-030-N2L-110GB1 motor?
A: The MDD093C-L-030-N2L-110GB1 motor utilizes digital servo feedback (DSF) for precise position and speed detection.
Q: How is the MDD093C-L-030-N2L-110GB1 motor cooled?
A: This motor is designed for surface cooling, which helps maintain optimal operating temperatures during use.
Q: What is the nominal speed of the MDD093C-L-030-N2L-110GB1 motor?
A: The nominal speed of the MDD093C-L-030-N2L-110GB1 is 3000 min⁻¹.
Q: Where is the electrical connection located on the MDD093C-L-030-N2L-110GB1 motor?
A: The connection is made via a connector on Side B of the motor.
