Product Description:

The MDD093C-L-030-N2L-110GB0 is a synchronous servo motor supplied by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded currents from the drive into precise rotary motion required for positioning tables, packaging axes, or general machine-tool feeds. Its compact mechanical frame and integrated position feedback streamline installation where closed-loop velocity and position control are mandatory. The unit operates as the primary mover inside the drive train, eliminating belts or gear reductions in many medium-power axes.

Mechanically, the motor follows standard balancing to limit residual vibration at its 093 frame size and C length code. The centering diameter of 110 mm provides a precise pilot for face mounting, ensuring coaxial alignment with coupled loads. The motor has a nominal speed of 3000 rpm for synchronous operation. Power and sensor terminations are oriented on side B, and a sealed connector interface simplifies cabling inside tight cabinets. Position verification is handled through digital servo feedback (DSF), allowing the controller to receive rotor data for high-resolution motion profiles.

The housing is configured for surface cooling, so external airflow or attached cold plates can remove heat without liquid circuits. Because the motor is delivered without a blocking brake, holding torque must be provided by the drive or an external clamp when the axis must hold position at power-off. The single-ended output uses a plain shaft that mates directly with couplings, and it includes a shaft seal to protect the interior against lubricant splash or fine dust. A standard shaft end on the drive side and no shaft extension on the opposite face leave additional room for gearbox flanges or encoders.