Product Description:

The MDD093C-F-060-N2L-110GR0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts commanded current into rotational motion that can be tightly regulated by a drive. Used on packaging stations, material-handling axes, or gantry systems, it integrates into closed-loop automation where quick speed changes and precise positioning are required.

This model reaches a nominal speed of 6000 rpm, allowing rapid cycle times on short-stroke axes. A centering diameter of 110 mm aligns the stator with machine frames, limiting radial runout and vibration. The housing is prepared for liquid cooling, so thermal energy is removed through an external coolant circuit instead of ambient air, maintaining constant winding temperatures during high-duty operation. Position data is returned through digital servo feedback (DSF), enabling the drive to calculate real-time rotor angle and reduce following error. Torque is delivered through a plain shaft; without keyways or serrations, this shaft style simplifies coupling to shrink-fit hubs while minimizing stress concentrations. Standard dynamic balancing further reduces residual forces at high speed, and the shaft end configuration omits a side B extension to conserve length.

The motor has a frame size 093 with length code C, giving moderate continuous torque capacity without enlarging the footprint. Axial sealing is provided by a shaft seal that keeps lubricant in and contaminants out, making the unit suitable for washdown or dusty areas. The motor is supplied without a blocking brake, so safety during idle states must be arranged externally. Electrical and encoder terminations route through right-side connections that use a single connector, reducing cable bend radius and simplifying cabinet layout.