Product Description:

The MDD093C-F-060-N2L-100GB0/S015 belongs to the MDD Synchronous Motors series from Bosch Rexroth Indramat. It is intended for use with digital drive controllers, where commanded current is converted into controlled torque and rotary motion for packaging stations, pick-and-place gantries, and similar automation equipment. Internal position sensing supports closed-loop operation, allowing the drive to monitor rotor movement continuously during acceleration, steady speed, and rapid indexing. In servo-driven axes, that control structure supports accurate positioning, stable speed regulation, and smooth transitions between motion segments.

The motor reaches a nominal speed of 6000 rpm, allowing high-throughput cycles when paired with a matching inverter. Its housing uses liquid cooling, so thermal loads are carried away through an external coolant circuit instead of relying on ambient air alone. Power and feedback leads exit on side B, which can help when the opposite face is occupied by machine hardware or a coupling guard. A single sealed connector carries motor phases and sensor lines in one connection point. Rotor position is monitored through digital servo feedback, which sends high-resolution signals to the drive for closed-loop speed and position control. This connection layout keeps both power and signal routing concentrated at one end of the housing, which can simplify integration in compact machine sections.

The mechanical interface is supplied without a blocking brake, so holding torque must be provided by the drive or by an external clamp when power is removed. Motion is transferred through a plain shaft, and contamination is limited by a design with a shaft seal. The frame uses length code C, which provides a longer active section than shorter variants while keeping the same flange pattern. The shaft arrangement is single-ended, because side B does not include an auxiliary shaft. The motor size is 093, and it uses a standard balancing grade to support steady running at elevated speed.