Product Description:

The MDD093C-F-040-N2M-110GA2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for digital drive controllers, where it converts controlled electrical input into mechanical rotation for positioning and speed-control tasks in automated machinery. Its mechanical and feedback features let it integrate into multi-axis assemblies used in packaging, printing, and material-handling lines. This arrangement supports coordinated motion where several axes must respond accurately to commanded movement.

The motor is designed for a nominal shaft speed of 4000 rpm. Position data is delivered by an integrated multi-turn absolute encoder, allowing the controller to read absolute rotor angle over multiple turns without homing. A blocking brake is fitted, and its holding capability is rated at 22 Nm, so vertical axes can remain stationary when power is removed. Heat generated in the stator is managed through a housing prepared for liquid cooling, which permits higher continuous torque density by circulating coolant around the frame. Command and diagnostic signals are exchanged over digital servo feedback (DSF), supporting high-resolution velocity and position loops between the motor and the matching drive.

The centering flange has a diameter of 110 mm, providing repeatable concentric alignment to gearboxes or machine frames. Power and feedback cables exit on side A, which helps keep cable routing consistent when the motor is mounted in fixed machine layouts. Drive torque is transferred through a plain shaft, and a shaft seal helps restrict oil or dust ingress at the output. Quick installation is helped by a keyed circular connector that matches the series wiring harness. The motor uses size 093 with length code C, and the standard balancing class supports stable running at high speed.