Product Description:

The MDD093C-F-030-R2L-110GB0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies closed-loop rotational power to axes that depend on precise position and velocity control. The size code 093 sets the frame dimensions, while the length code C indicates the stack depth used for medium-inertia applications. In automation lines, the motor converts electrical energy from an Indramat drive into mechanical torque that can position tooling, conveyors, or packaging heads with predictable response and repeatability.

The mechanical envelope includes a centering pilot of 110 mm that aligns the flange to the machine frame and helps keep runout low. Electrical and feedback leads exit on side B through a locked connector, allowing cable routing away from the driven shaft. The stator is wound for a nominal speed of 3000 rpm, permitting direct coupling to gearboxes without overspeeding. A liquid channel surrounds the housing, and liquid cooling removes heat so the motor can hold rated torque during elevated duty cycles. Contaminant ingress is limited because the shaft is supplied with a shaft seal that helps block spray during washdown.

Dynamic behavior is aided by class R balancing, which keeps residual vibration low at operating speed. Position data returns to the controller through digital servo feedback, enabling tight control loops without external transducers. The rotor uses a plain shaft that follows the standard front-end geometry and does not include a shaft on the rear side, which simplifies coupling selection. An internal brake is not present, and the unit is supplied without a blocking brake, so vertical axes require an external holding device. This layout suits installations that need accurate motion, stable operation, and a straightforward mechanical interface.