MDD093C-F-030-N2M-110GA2
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911265950
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
-
In-Stock, Ships 3-5 Days
The MDD093C-F-030-N2M-110GA2 Servo Motor is manufactured by Bosch Rexroth Indramat. This unit operates with a 3000 Min nominal speed, Digital Servo Feedback with integrated multiturn absolute encoder , a(n) Plain Output Shaft, and it is Equipped with a blocking brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093C-F-030-N2M-110GA2 is a MDD series digital AC servo motor with liquid cooling. It has a rated speed of 3000 revolutions per minute whereas it has a continuous stall torque of 37.1 Nm, and the continuous stall current is 61.2 A. It has a peak current of 145 A, and the rotor moment of inertia is 0.0042 kgm2. The winding inductance and winding resistance at 20 degrees centigrade are 2.7 mH and 0.25 ohm respectively. The mass of the motor excluding the holding brake weighs 22 kg.
The rated power loss of the machine is 970 W whereas the ambient temperature for coolant is 5 C to 45 C. The coolant entry temperature is 10 C to 40 C whereas the maximum coolant flow through coolant temperature increase with Pn of 10 C is 1.4 I/min. The release delay of the blocking brake in MDD093C-F-030-N2M-110GA2 is 70 ms, and the clamp delay is 30 ms. The exclusive holding brake weight is 1.1 kg, and the operating voltage is 24V DC with a 10 percent tolerance. The nominal current of the machine is 0.7 A, whereas the rotor moment of inertia is 3.6 x 10-4 kgm2.
The overall weight of the MDD093C-F-030-N2M-110GA2 is 23.1 kg, and the complete rotor moment of inertia value will increase to 0.0045 kgm2. It is advised to not consider this brake as a service brake. The service life of the holding brake is approximately twenty thousand revolutions against the closed brake. The output shaft of this MDD motor is plain and the power connection is connected through the connector to side A. The liquid coolant has the maximum system pressure of 3 bar whereas the pressure drop is 0.7 bar. The thermal time constant of the machine is 25 minutes.
