Product Description:

The MDD093C-F-020-N2L-110GB0 is a synchronous servo motor built by Bosch Rexroth Indramat for the MDD Synchronous Motors series. It is intended for use with digital drive controllers, converting commanded current into controlled torque for positioning tasks and stable speed control on production equipment. A 110 mm centering diameter helps align the motor with compatible machine interfaces during installation. The unit uses a plain shaft for direct coupling, which suits clamp-style hubs and other friction-based connections. The housing is arranged for liquid cooling, so heat is removed through an internal coolant path instead of relying on external airflow devices.

This model reaches a nominal speed of 2000 rpm, which suits moderate-speed material handling and tooling duties. Power and feedback conductors leave from Side B of the housing, which can help keep cable loops away from adjacent moving parts and machine guards. The motor uses an integral connector, so the electrical connection is made through a plug-in interface rather than individually terminated cores. The shaft is provided only on the drive side, leaving the opposite end without an extra extension. Rotor balancing is kept to the standard grade to help reduce vibration during normal operation.

Position information is returned through Digital servo feedback (DSF), allowing the drive to track rotor position during closed-loop motion. The motor is supplied without a blocking brake, so any holding force at standstill must come from the drive or from external machine hardware. It is also equipped with a shaft seal, which helps limit dust entry at the output journal and supports cleaner operation around the bearing area. This combination of feedback and sealing supports dependable use in automated axes where repeatable motion and orderly cable routing are important. The cooling arrangement also makes the motor suitable for sustained duty in enclosed machine layouts where ambient airflow is limited.