MDD093B-N-040-R2L-110GA0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911259723
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
29 Seconds
The Bosch Rexroth Indramat MDD093B-N-040-R2L-110GA0 is part of the MDD Synchronous Motors series and features a nominal speed of 4000 rpm as well as a continuous torque at standstill of 14.5 Nm. This motor includes a 110 mm centering diameter, a plain shaft with seal, and a digital servo feedback system. It connects on Side A using a standard housing and has no holding brake.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-040-R2L-110GA0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to pair with digital drive controllers, the motor converts commanded current into precise rotary motion for indexing tables, gantry axes, and other automated stations. Its sealed housing and integrated feedback arrangement support reliable position control in typical industrial environments. The enclosed design also helps protect internal components from routine shop contamination, and the motor is suited to repeated acceleration, deceleration, and reversing cycles. Because it is a synchronous servo motor, it is intended for applications where stable speed regulation and accurate shaft positioning are both required.
At standstill, the motor provides a continuous torque of 14.5 Nm, allowing static loads to be supported without overheating. During operation, it reaches a nominal speed of 4000 rpm, which suits high-speed transfer axes and similar motion tasks. Accurate commutation is maintained by digital servo feedback, which supplies position information to the controller for closed-loop operation and smooth low-speed response. A centering diameter of 110 mm seats the motor accurately in the machine bore and helps minimize runout at the coupling. The unit is supplied without a blocking brake, so any holding force at standstill must come from the drive or an external mechanism when the axis is parked.
Electrical and signal leads enter through a connector, and all plugs face side A of the stator to keep cable routing in one direction. The frame size code 093 and the length designation B indicate the motor envelope and active stack length used for this design. The motor has a standard housing, a plain shaft with a shaft seal, and balancing grade R to limit vibration during rotation. It also uses a standard drive-side shaft end with no extension on side B, which supports direct coupling to gearboxes, pulleys, or similar transmission elements. This layout keeps the rear of the motor clear and can simplify installation where space behind the housing is limited.
Frequently Asked Questions about MDD093B-N-040-R2L-110GA0:
Q: What is the continuous standstill torque for the MDD093B-N-040-R2L-110GA0 motor?
A: The MDD093B-N-040-R2L-110GA0 has a continuous torque at standstill of 14.5 Nm.
Q: What type of shaft and sealing does the MDD093B-N-040-R2L-110GA0 motor use?
A: This motor features a plain shaft with a shaft seal for added protection against contaminants.
Q: What feedback system is implemented in the MDD093B-N-040-R2L-110GA0 motor?
A: Digital servo feedback (DSF) is used for motor feedback on this model.
Q: How is the MDD093B-N-040-R2L-110GA0 motor electrically connected?
A: The electrical connection is located on Side A and utilizes a connector for interfacing.
Q: What is the nominal speed rating of the MDD093B-N-040-R2L-110GA0?
A: The MDD093B-N-040-R2L-110GA0 operates at a nominal speed of 4000 min⁻¹.
