Product Description:

The MDD093B-N-040-N2M-130PR2 synchronous servo motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers in positioning and velocity-control tasks across automated machinery. As a synchronous servo motor, it converts drive commands into controlled rotary motion for feed axes, indexers, and handling systems that require repeatable positioning. The motor uses a compact frame with a standard housing, which helps it fit transfer units, feeder systems, and pick-and-place assemblies where installation space is limited. Integrated position feedback provides the drive with real-time motion data, and the built-in brake holds the axis when power is removed.

The motor has a nominal speed of 4000 rpm, which is its continuous operating speed under rated conditions. At standstill, it can provide 14.5 Nm of continuous torque, allowing the axis to hold load while remaining within normal thermal limits. A blocking brake rated at 22 Nm engages when power is removed to help prevent shaft movement on vertical or suspended loads. Position data is transmitted through digital servo feedback (DSF), so the connected controller receives precise rotor information for closed-loop operation. A centering diameter of 130 mm keeps the motor aligned with mating machine surfaces during mounting.

Power and feedback conductors leave the housing on the right side through a keyed connector, which helps keep cable routing organized in compact installations. The output shaft uses a keyway for torque transmission, and a shaft seal helps limit the entry of dust and other contaminants. The motor has length code B, which indicates a compact housing length within this frame size. The shaft end on side A is standard, while side B remains closed, so the motor keeps a short overall profile for tight machine layouts.