Product Description:

The MDD093B-N-040-N2M-130PL2 is a synchronous motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts commanded electrical power into regulated mechanical rotation for automated machinery, conveyor lines, and processing equipment. When paired with a suitable controller, the motor supports closed-loop motion tasks that require stable speed control and accurate position feedback during repeated operating cycles.

At the mechanical interface, the motor has a 130 mm centering diameter that aligns its flange with mounting plates and helps seat the housing accurately during installation. Electrical terminations are routed on the left side through a sealed connector, which helps preserve the enclosure integrity of the standard housing. Under continuous standstill, the drive can exert 14.5 Nm of torque without exceeding temperature limits, and the integrated multiturn absolute encoder supplies position data for closed-loop regulation up to a nominal speed of 4000 rpm. Internal stator windings and thermistors pass through the same interface, which reduces the number of external connection points. The flange bolt holes follow ISO mounting patterns, allowing the motor to fit common machine interfaces prepared for this frame size.

The blocking brake supplies 22 Nm of static holding capability, allowing load retention when power is removed. Motion and diagnostic information are exchanged with the controller through digital servo feedback (DSF), which is carried through the connector used on this model. The motor uses a keyway shaft for torque transmission, and a shaft seal helps protect the bearing area from dust and oil migration. The 093 frame size and motor length code B keep the housing within the usual envelope for this motor family, and the connector position can help simplify cable routing outside the machine frame.