MDD093B-N-040-N2M-130PB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254578
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
8 Seconds
The Bosch Rexroth Indramat MDD093B-N-040-N2M-130PB2 is part of the MDD Synchronous Motors series. This motor provides a continuous torque at standstill of 14.5 Nm and a nominal speed of 4000 rpm. It features an integrated multiturn absolute encoder, a keyway shaft with seal, and a holding brake with a torque of 22 Nm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-040-N2M-130PB2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Integrated with a digital drive controller, the unit supplies closed-loop torque and speed in automated stations that require repeatable positioning, rapid acceleration, and compact mechanical footprints. It is suitable for axes that must start, stop, and reverse quickly while maintaining stable motion under changing loads. The motor combines electrical power conversion with feedback-based control so the connected drive can regulate speed and position with high consistency.
At standstill, the motor can deliver a continuous torque of 14.5 Nm, allowing it to hold or move moderate loads without overheating. During operation, its shaft reaches a nominal speed of 4000 rpm, making it suitable for fast indexing or high-speed process axes. A blocking brake generates up to 22 Nm of static torque, so vertical or suspended loads remain fixed when power is removed. The centering diameter measures 130 mm, providing a locating surface that aligns the stator housing to machine frames. Power and feedback conductors exit on Side B, which simplifies cable routing when the opposite face must remain accessible. A standard dynamic balancing grade helps reduce residual vibration, and the 093 frame size fits mid-range drives used in packaging, assembly, and material-transfer equipment.
The electrical interface is realized through a sealed connector that mates quickly with motor cables used on digital drive systems. Position data comes from an integrated multi-turn absolute encoder, while velocity feedback uses the motor’s digital servo feedback protocol to support high-resolution control loops. The shaft uses a keyway for positive torque transmission to pulleys or couplings. The motor is supplied with a shaft seal, which helps protect internal bearings from coolant splash and dust. Standard housing fabrication, a B length code, and a single-ended shaft provide a consistent mechanical layout for modular machine designs.
Frequently Asked Questions about MDD093B-N-040-N2M-130PB2:
Q: What is the continuous torque at standstill for the MDD093B-N-040-N2M-130PB2 motor?
A: The MDD093B-N-040-N2M-130PB2 provides a continuous torque of 14.5 Nm at standstill, allowing stable performance for motion tasks.
Q: What type of encoder is integrated into the MDD093B-N-040-N2M-130PB2 motor?
A: This motor is equipped with a built-in multiturn absolute encoder, providing reliable position tracking.
Q: What is the holding brake torque available on the MDD093B-N-040-N2M-130PB2?
A: A blocking brake with a holding torque of 22 Nm is included for secure position maintaining when the motor is not powered.
Q: What is the connection direction and type for the MDD093B-N-040-N2M-130PB2 motor?
A: The connection is made via a side B connector, simplifying integration into automation systems.
Q: What type of shaft and sealing does the MDD093B-N-040-N2M-130PB2 have?
A: The shaft on this model features a keyway design and is equipped with a shaft seal to protect against contaminants.
