MDD093B-N-040-N2M-130PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911266665
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
27 Seconds
The Bosch Rexroth Indramat MDD093B-N-040-N2M-130PB0 is a motor from the MDD Synchronous Motors series designed for digital drive controllers. It has a nominal speed of 4000 rpm and provides a continuous torque at standstill of 14.5 Nm. The motor features an integrated multiturn absolute encoder, digital servo feedback, and a 130 mm centering diameter with a keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-040-N2M-130PB0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts commanded current into precise rotational motion for positioning and speed-controlled axes in automated equipment. Its synchronous design supports accurate response during starts, stops, and speed changes in packaging, transfer, and handling systems. Closed-loop control is handled over digital servo feedback, giving the controller direct access to high-resolution position and velocity data.
At standstill, the motor supplies a continuous torque of 14.5 Nm, enabling it to hold loads without thermal overload. Its nominal operating speed reaches 4000 rpm, supporting high-cycle machines that demand rapid acceleration. A centering flange diameter of 130 mm ensures coaxial alignment when the unit is seated in standard mounting plates. Power and feedback cabling exits on side B through a molded connector, allowing compact installation against adjoining components and keeping the cable path close to the housing. The rotor is balanced to the standard grade to limit residual vibration during rotation. Position data is delivered by an integrated multi-turn absolute encoder, providing multi-revolution resolution to the drive. For applications that rely on dynamic reversals rather than static holding, the motor is supplied without a blocking brake, which reduces inertia.
The output shaft uses a keyway profile to transmit torque reliably to couplings or gearboxes, and the motor is built with a shaft seal to protect internal bearings from dust and coolant ingress. Only the drive-side shaft is accessible, which keeps the overall length compact within the 093 frame and B length code. A standard aluminum housing aids heat dissipation during operation and supports stable thermal behavior under continuous use. The connector interface matches approved cable sets, and the motor fits well in packaging lines, pick-and-place units, and light forming stations where installation depth is limited.
Frequently Asked Questions about MDD093B-N-040-N2M-130PB0:
Q: What type of encoder does the MDD093B-N-040-N2M-130PB0 motor use?
A: The MDD093B-N-040-N2M-130PB0 is equipped with an integrated multiturn absolute encoder for precise position feedback.
Q: What is the continuous torque at standstill for the MDD093B-N-040-N2M-130PB0?
A: This motor can deliver a continuous torque of 14.5 Nm at standstill.
Q: What kind of shaft and sealing does the MDD093B-N-040-N2M-130PB0 motor offer?
A: The MDD093B-N-040-N2M-130PB0 features a keyway shaft with a shaft seal for added protection against contaminants.
Q: Is the MDD093B-N-040-N2M-130PB0 equipped with a holding brake?
A: This model is manufactured without a blocking brake.
Q: Where is the electrical connection on the MDD093B-N-040-N2M-130PB0, and what type is it?
A: The electrical connection interface is located on Side B and uses a connector type for cabling.
