MDD093B-N-040-N2M-130GL0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
24 Seconds
The Bosch Rexroth Indramat MDD093B-N-040-N2M-130GL0 is a synchronous motor from the MDD Synchronous Motors series, designed for use with digital drive controllers. It offers a nominal speed of 4000 revolutions per minute and delivers a continuous torque of 14.5 Nm at standstill. The motor features an integrated multiturn absolute encoder, a plain shaft with a shaft seal, and a centering diameter of 130 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-040-N2M-130GL0 is an AC synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. The model serves as an electromechanical actuator for digital drive controllers in industrial automation lines where precise torque and speed regulation are required for coordinated motion axes. By combining permanent-magnet excitation with an internal feedback device, the motor converts electrical power into rotational torque for tasks such as packaging, pick-and-place, or machine-tool positioning. This arrangement allows the drive system to respond quickly to command changes and maintain stable motion during repeated cycles.
It seats against a locating shoulder with a centering diameter of 130 mm, which helps align the motor with mounting flanges and coupled machine elements. Power and feedback cabling exit on the left side, and the connections are made through a rugged connector for secure attachment. Under continuous stall conditions, the stator can deliver 14.5 Nm of torque, which helps the axis resist movement while the shaft is not rotating. Position data are supplied by an integrated multi-turn absolute encoder, so the controller receives absolute position information over multiple revolutions. This supports immediate position recognition after startup and reduces the need for a return-to-reference move.
The drive interface uses Digital servo feedback (DSF) to transmit incremental and absolute signals for closed-loop regulation. At the nominal operating point, the motor reaches a rated speed of 4000 rpm, giving the axis a broad operating range for positioning and transfer tasks. Mechanical output is transmitted through a balanced plain shaft, and the shaft is supplied with a shaft seal to help limit dust entry and lubricant leakage. Because the motor does not include a blocking brake, any load that must remain fixed at standstill requires an external holding method. Standard balancing and the B length support smooth operation without adding unnecessary bulk to the motor body.
Frequently Asked Questions about MDD093B-N-040-N2M-130GL0:
Q: What is the continuous torque at standstill for the MDD093B-N-040-N2M-130GL0 motor?
A: The MDD093B-N-040-N2M-130GL0 provides a continuous torque of 14.5 Nm at standstill.
Q: What type of encoder is integrated in the MDD093B-N-040-N2M-130GL0?
A: This model features an integrated multiturn absolute encoder for precise feedback.
Q: What is the connection direction for the MDD093B-N-040-N2M-130GL0 motor?
A: The connection direction on this motor is specified as left.
Q: What kind of shaft and seal does the MDD093B-N-040-N2M-130GL0 have?
A: A plain shaft with a shaft seal is used on this motor for smooth rotary operation and protection against contaminants.
Q: Does the MDD093B-N-040-N2M-130GL0 motor include a holding brake?
A: The MDD093B-N-040-N2M-130GL0 does not come equipped with a blocking brake.
