Product Description:

The MDD093B-N-040-N2M-130GA2 is a synchronous servo motor produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. It serves as the rotary actuator in digital drive systems, translating controlled current from a drive controller into precise motion for indexing tables, packaging axes, and material-handling gantries in industrial automation. Used with a compatible drive, it supports accurate speed and position control during repeated motion cycles. The motor is intended for applications that require repeatable starts, stops, and directional changes while keeping the drive package compact.

The motor has a nominal speed of 4000 rpm, allowing high shaft speed when paired with a suitable drive. At standstill, it can produce 14.5 Nm of continuous torque, which supports steady holding and positioning duty without excessive thermal stress. An integrated blocking brake provides 22 Nm of braking torque to secure the shaft during power loss or emergency stops. A centering diameter of 130 mm helps align the motor with connected machine elements. Position control is handled through digital servo feedback (DSF), giving the controller accurate speed and angle information throughout operation. This arrangement lets the motor deliver controlled motion during operation and mechanical holding when power is removed.

The motor uses an integrated multiturn absolute encoder, so the drive can retain position information across multiple revolutions after shutdown. Power and feedback connections exit on Side A, and a single connector keeps cable routing straightforward while preserving the enclosure seal. Torque is transmitted through a plain shaft, and the internal shaft seal helps limit dust entry and lubricant escape. Standard dynamic balancing supports smooth running over the speed range. The B-length housing also keeps the axial package compact for machine layouts with limited installation space.