MDD093B-N-040-N2M-110PR1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
9 Seconds
The Bosch Rexroth Indramat MDD093B-N-040-N2M-110PR1 is part of the MDD Synchronous Motors series and features a standard housing with a 110 mm centering diameter. This motor has a continuous standstill torque of 14.5 Nm, a nominal speed of 4000 min⁻¹, and comes with an integrated multiturn absolute encoder. It is equipped with a blocking brake that provides a holding brake torque of 11 Nm and includes a shaft with keyway and shaft seal.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-040-N2M-110PR1 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it converts electrical energy into precisely regulated torque and speed for industrial automation cells. When paired with a compatible drive, the unit supports closed-loop motion control for indexing tables, pick-and-place gantries, and other equipment that requires repeatable angular positioning. Its compact housing also suits installations where accurate response and stable servo behavior are required over repeated operating cycles.
Its continuous stall capability reaches 14.5 Nm, allowing the axis to support static loads without overheating when the rotor is locked. During dynamic operation, the motor can accelerate up to a nominal speed of 4000 rpm, which marks the upper range for normal motion profiles. A built-in brake supplies 11 Nm of holding torque so vertical or suspended axes remain fixed when power is removed. The flange machining provides a centering seat of 110 mm, which helps align the housing concentrically on mounting fixtures. Power is transmitted through a keyway, which helps prevent slippage between the motor shaft and the coupled pulley, gear, or hub during repeated start-stop cycles.
Position data is returned through digital servo feedback (DSF), and an embedded integrated multiturn absolute encoder allows the drive to track shaft revolutions after power loss without external sensors. Electrical and feedback connections are grouped on the right side, and a coded connector interface simplifies wiring during installation. Standard balancing helps reduce residual vibration during rotation. A shaft seal protects the internal bearings from coolant splash, and the single-ended shaft arrangement on side A leaves the opposite face free for through-cabinet mounting.
Frequently Asked Questions about MDD093B-N-040-N2M-110PR1:
Q: Does the MDD093B-N-040-N2M-110PR1 motor have a holding brake?
A: Yes, the MDD093B-N-040-N2M-110PR1 includes a blocking holding brake.
Q: What is the continuous standstill torque rating of the MDD093B-N-040-N2M-110PR1?
A: This motor has a continuous torque at standstill of 14.5 Nm.
Q: What type of encoder is integrated in the MDD093B-N-040-N2M-110PR1 motor?
A: The MDD093B-N-040-N2M-110PR1 is equipped with an integrated multiturn absolute encoder.
Q: What is the connection direction for the MDD093B-N-040-N2M-110PR1 motor?
A: This motor’s connection direction is configured to the right.
Q: What type of shaft and seal does the MDD093B-N-040-N2M-110PR1 include?
A: A keyway shaft with a shaft seal is provided for this motor.
