Product Description:

The MDD093B-N-040-N2M-110PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is classified as a motor for digital drive controllers. It supplies closed-loop torque and speed to automated processes such as pick-and-place units, indexing tables, and packaging axes where precise rotary motion is required. Its synchronous design supports repeatable positioning and stable speed regulation during frequent start-stop cycles.

This model sustains 14.5 Nm of continuous torque at standstill, allowing static loads to be held without thermal overload. During dynamic operation, it can reach a nominal speed of 4000 rpm, supporting short cycle times. An integral blocking brake rated at 22 Nm secures the shaft whenever power is removed, preventing drift on vertical or safety-critical axes. Accurate mechanical alignment is aided by a 110 mm centering diameter that matches the 093 frame size. Position reference is supplied by an integrated multiturn absolute encoder, permitting the drive to track multiple revolutions after a power interruption. Standard rotor balancing minimizes vibration. The B length code indicates a mid-length stator for balanced torque density, and the housing is supplied in the standard enclosure style.

Feedback to the controller is conveyed through digital servo feedback (DSF), allowing the drive to process motor data directly during operation. All power and signal leads exit the unit on the left side, and a single locking connector keeps cable routing compact. The output shaft is machined with a keyway for positive torque transfer, and a shaft seal protects the internal bearings so the motor can operate in splash or oil-mist environments. A standard single-ended shaft configuration on side A, with no extension on side B, leaves space for couplings while maintaining the footprint required in multi-axis assemblies.