Product Description:

The MDD093B-N-040-N2M-110PL0 is a synchronous servo motor produced by Bosch Rexroth Indramat and included in the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where regulated inverter current is converted into precise rotary motion for positioning, indexing, and speed-controlled axis movement. This arrangement lets the connected drive correct speed and position errors as load conditions change during operation. The motor is suitable for automated equipment such as conveyors, tooling stations, and gantry systems that require repeatable motion. Its compact format supports installation in machines where accurate axis control is needed without a large mounting footprint.

Its continuous standstill torque is rated at 14.5 Nm, allowing the motor to hold load at zero speed within its thermal limits. A nominal speed of 4000 rpm supports fast axis movement while maintaining synchronous operation. The flange uses a 110 mm centering pilot for accurate alignment, and the shaft has a keyway for positive torque transmission to the coupling or driven load. Position and velocity are returned through Digital servo feedback (DSF), which supports accurate commutation and stable speed regulation. An integrated multi-turn absolute encoder tracks position across multiple revolutions, so the control system can retain shaft position information beyond a single turn. The motor also has frame length B, standard balancing, and a standard housing for general industrial duty.

Power and feedback cables exit on the left side through a sealed connector, which helps routing in narrow panels or confined machine spaces. The motor is supplied without a blocking brake, so static holding must be provided by drive torque or by an external brake. The motor has size code 093, a shaft seal, and a single shaft end on side A, while side B remains unused. The shaft seal helps protect the bearing area from contamination and helps retain lubricant during operation.