Product Description:

The MDD093B-N-040-N2M-110PA0 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers and converts commanded current into regulated rotary motion for indexing tables, packaging axes, and other automated stations that require accurate speed and position control. The motor's permanent-magnet design supports responsive acceleration and stable closed-loop operation in repetitive duty cycles. This makes it suitable for machinery that must start, stop, and reposition with consistent accuracy throughout production.

At standstill, the motor delivers a continuous torque of 14.5 Nm, allowing it to hold loads during static positioning without excessive heating. When energized at rated frequency, the rotor reaches a nominal speed of 4000 rpm, which suits applications that require short cycle times and quick axis response. A centering diameter of 110 mm helps align the motor accurately with matching machine frames. All power and feedback cabling exits on the A-side, and a plug-in connector simplifies connection routing. Standard dynamic balancing helps reduce vibration, and the B-length housing keeps the motor within the 093 frame envelope.

Position data is generated by an integrated multi-turn absolute encoder, and the signals are transmitted to the drive through digital servo feedback for precise control. The output shaft uses a keyway, and it is fitted with a shaft seal to help block lubricant loss and contaminant entry at the coupling interface. The motor is supplied without a blocking brake, so stationary loads must be held by maintained drive torque or an external holding device when power is removed. Only the drive-side shaft end is present, which shortens the overall length. This layout supports compact installation where rear shaft access is not required.