Product Description:

The MDD093B-N-040-N2M-110GR1 belongs to the MDD Synchronous Motors series manufactured by Bosch Rexroth Indramat. It is an AC servo motor intended for integration with digital drive controllers where precise speed and torque regulation are required on automated axes. By converting electrical commands from the controller into rotational motion, the motor positions tooling, conveyor sections, or actuators in closed-loop industrial machinery. The design suits applications that benefit from brushless operation, compact dimensions, and a standard housing for machine installation. This layout is suitable for packaging, handling, and other automated systems that depend on repeatable motion during continuous operation.

The motor reaches a nominal speed of 4000 rpm. It can sustain a continuous standstill torque of 14.5 Nm, allowing static load holding without overheating when the shaft is not moving. Position feedback is supplied by an integrated multi-turn absolute encoder, which transmits both revolution count and angular position to the controller for repeatable homing sequences. Accurate mechanical centering is aided by a 110 mm centering diameter, matching the flange dimensions of gearboxes or direct-drive mounts. For emergency stops or vertical axes, a blocking brake rated at 11 Nm applies holding force when power is removed, preventing unintended motion.

Power and feedback conductors enter on the right side through a sealed connector, which helps keep cable routing orderly in tight panels. The rotor is coupled to the load through a plain shaft; there is no side B extension, so couplings fit directly onto the primary end. Electrical commutation signals reach the drive over digital servo feedback, supporting high-bandwidth current loops without encoder interpolation. The motor is built with a shaft seal, which helps limit coolant or dust ingress into the bearing zone. Standard dynamic balancing and housing geometry help reduce vibration in general-purpose automation stations.