Product Description:

The MDD093B-N-040-N2M-110GL0 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts electrical command signals into controlled mechanical rotation for positioning, indexing, and speed-regulated tasks in automated machinery. Its synchronous design supports accurate motion control, and the integrated feedback arrangement allows the drive to monitor rotor position continuously during operation.

This model supplies a continuous standstill torque of 14.5 Nm, allowing it to hold or start loads without overheating under rated conditions. Its nominal operating speed reaches 4000 rpm, giving the axis a wide usable speed range. Accurate alignment is supported by a centering diameter of 110 mm. Power and feedback leads exit on the left side through a compact connector, which helps keep cable routing orderly in tight machine layouts. Closed-loop control relies on an integrated multiturn absolute encoder, and position data is transmitted as digital servo feedback. Standard balancing helps reduce vibration at higher speeds, and the B-length housing fits the 093 stator size without adding unnecessary bulk.

The mechanical interface is configured without a blocking brake, so any holding force at standstill must come from the external drive or the machine mechanics. The shaft is supplied with a shaft seal to help limit lubricant loss and reduce the entry of fine contaminants. Its output is a plain shaft, making it suitable for clamped or keyed coupling arrangements. The shaft end is provided only on side A, which suits single-ended drive trains. The standard enclosure style supports cabinet or open-frame installation in clean industrial environments, and the internal wiring layout keeps the motor compact.