Product Description:

The MDD093B-N-040-N2L-130PL2 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed to work with digital drive controllers, this motor converts command signals into controlled rotary motion for tasks such as pick-and-place axes, conveyor positioning, or indexing tables in automated production. Its permanent-magnet rotor, feedback electronics, and integral brake create a compact drive stage suited to high-throughput machinery. This combination supports accurate starts, stops, and repeatable positioning during frequent duty cycles.

Mounting precision is provided by a centering diameter of 130 mm, which aligns the stator flange with adjacent machine faces. At standstill, the motor can continuously deliver 14.5 Nm of torque, allowing holding applications to resist load without overheating. During motion, the shaft reaches a nominal 4000 rpm, enabling rapid acceleration and short cycle times. A spring-applied brake supplies 22 Nm of locking torque so vertically oriented axes or suspended tooling remain secure when power is removed. Position and velocity data are relayed over digital servo feedback, giving the controller high-resolution information for closed-loop correction. The rotor uses standard balancing to reduce vibration, and the connector interface simplifies cable attachment. Wiring exits on the left side of the housing to match common cabinet cable routes.

The motor uses length code B and a standard housing that shares the mounting footprint used across the MDD 093 family. Its output shaft incorporates a keyway for positive drive coupling, and it is built with a shaft seal to help keep lubricant or coolant out of the front bearing chamber. A single-ended shaft on side A helps limit rotating mass and supports responsive motion. The integrated brake and connector layout keep the package compact for servo-driven automation equipment.