Product Description:

The MDD093B-N-040-N2L-130PB0 is a servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts controlled electrical energy into torque for coordinated axes in automated packaging, printing, and material-handling equipment. The unit uses the housing style common to this motor line and suits compact installations that still require precise electronic commutation and dependable feedback. Its synchronous design supports stable speed control and repeatable positioning during frequent start-stop cycles. This type of motor is commonly used where accurate motion tracking is needed throughout repeated production runs.

It delivers a continuous standstill torque of 14.5 Nm, allowing the axis to resist load movement at zero speed. During operation, the rotor reaches a nominal speed of 4000 rpm, which supports short cycle times on high-throughput machines. A centering diameter of 130 mm positions the flange accurately on the mounting plate. Power and feedback leads exit on Side B, and position is reported through Digital servo feedback (DSF) for closed-loop velocity and position control. The output shaft includes a shaft seal to help keep contaminants away from internal components, and a single connector carries both power and signal conductors.

The rotor is balanced to Standard grade, which helps limit vibration transfer to adjacent machine elements. Stack depth corresponds to motor length code B, fitting the size-093 frame envelope without increasing the mounting footprint. A keyed output with a keyway shaft provides positive torque transfer to couplings, and this arrangement supports direct coupling to common transmission components. The motor is supplied without a blocking brake, so holding force must come from the drive when power is removed. The rear shaft is not used, which keeps the mechanical layout simple.