Product Description:

The MDD093B-N-040-N2L-130PA0 is a synchronous AC motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Designed for closed-loop operation with digital drive controllers, it converts commanded current into controlled torque and speed for indexing conveyors, multi-axis pick-and-place modules, and form-fill-seal equipment. The motor is intended for precise axis control, where the drive continually compares command values with feedback signals to keep motion stable during acceleration, steady running, and rapid stopping.

A centering diameter of 130 mm allows direct seating in compatible machine frames without adapter rings. For wiring, the power and feedback connections are oriented toward Side A and use a sealed connector, which helps protect the interface and keeps cable routing orderly in compact machine layouts. During continuous stall conditions, the motor can deliver 14.5 Nm, giving the drive enough torque for static loads without excessive heating. The unit is built without a blocking brake, so power-off holding must be provided by external clamping or controlled drive torque. Position and velocity are returned through Digital servo feedback (DSF), allowing the controller to correct deviations quickly and maintain smooth closed-loop operation.

The motor has a nominal speed of 4000 rpm, which supports high-cycle operation on packaging and material-handling axes. The output shaft uses a keyway for positive torque transfer and includes a shaft seal to help keep lubricant in place and reduce the entry of contaminants near internal rotating parts. Standard rotor balancing helps reduce vibration across the operating range, which supports smoother motion and less stress on coupled components. The B-length housing keeps the motor compact while still providing enough active material for the 093 frame size.