Product Description:

The MDD093B-N-040-N2L-130GR0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for coupling to digital drive controllers, it converts commanded current into regulated rotary motion for positioning tasks in automated machinery. The unit follows motor size 093 and length code B, balancing rotor inertia with a compact housing so it can fit mid-frame equipment across general industrial automation. This layout suits transfer axes, packaging stations, and similar machines that require repeatable motion in a limited installation space.

Its nominal speed reaches 4000 rpm, allowing the axis to follow high-frequency command signals. At standstill the motor sustains 14.5 Nm of continuous torque, permitting static load support without exceeding thermal limits. A centering diameter of 130 mm positions the flange precisely against gearboxes or mounting plates. Mechanical output is delivered through a plain shaft, enabling direct coupling without keys or splines. Position and velocity feedback are provided by digital servo feedback, giving the controller high-resolution data for tight motion loops and fast response to changing load conditions.

The motor’s dynamic profile is assisted by standard rotor balancing and a housing that follows the series' normal convection path. Electrical and encoder terminations use the right-side connection direction, which can help route cables away from nearby machine members. Power and signal conductors mate to a single connector, which reduces assembly time compared with terminal blocks. For environmental protection, the unit includes a shaft seal that helps limit lubricant migration into the bearing chamber. Because it is supplied without a blocking brake, external locking devices must be added when vertical axis retention is required. The shaft end is standard on side A only, leaving side B closed to accommodate the encoder hardware.