Product Description:

The MDD093B-N-040-N2L-130GL1 is a synchronous servo motor produced by Bosch Rexroth Indramat and assigned to the MDD Synchronous Motors series. Designed for use with digital drive controllers, it converts electrical energy into precise rotary motion for indexing tables, gantries, and packaging axes in automated equipment. An internal blocking brake holds position when power is removed, and the standard housing keeps the motor compact enough for machine layouts where installation space is limited.

The motor provides a continuous standstill torque of 14.5 Nm, which supports stable load holding during low-speed operation without excessive thermal stress. At a nominal speed of 4000 rpm, it is suitable for applications that require fast cycle rates and responsive axis movement. Feedback is supplied through digital servo feedback (DSF), allowing the controller to monitor rotor position and velocity with closed-loop accuracy. Electrical connections are made through a sealed connector, which helps protect the interface from dirt and moisture. The motor uses frame size 093, and the B housing length provides the active motor length used for this version. A shaft seal is fitted at the output end to help limit the entry of dust or coolant during normal operation. Rotor balance is maintained to a standard grade so vibration remains controlled during routine motion.

The centering pilot measures 130 mm, which helps align the motor accurately with a gearbox or machine plate during mounting. All cable exits are oriented to the left, which can simplify routing where surrounding components restrict cable bend space. The output is a plain shaft, so torque is transmitted through a clamping coupling rather than a keyed hub. For static holding, the integrated brake provides 11 Nm of torque. The motor also uses a standard shaft end on side A, combining sealed output geometry with connector-based wiring for a clean installation layout.