Product Description:

The MDD093B-N-040-N2L-130GB1 is a synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for digital drive controllers, it transforms controlled electrical power into repeatable rotary motion that follows commanded position and speed profiles in automated cells, pick-and-place units, and packaging stations. Its 093 frame size and B length code give it a compact mid-range envelope that suits multi-axis modules without increasing cabinet depth. This layout is well suited to positioning tasks that require accurate starts, stops, and reversals throughout repeated production cycles.

The motor sustains a continuous standstill torque of 14.5 Nm, allowing it to hold static loads without external gearing or overheating. The rated speed is 4000 rpm, giving the drive a broad operating range for rapid process cycles. Both power and feedback conductors exit on side B, which keeps wiring clear of adjoining mechanics and simplifies chain routing. A single multi-pin connector provides a compact interface for these electrical connections. Rotor position is reported through digital servo feedback, so the controller can close the loop with high gain and suppress following error during direction reversals. Standard dynamic balancing minimizes residual vibration across the usable speed range.

An integrated brake supplies 11 Nm of holding torque to lock the shaft during emergency stops or power loss. The centering pilot measures 130 mm, giving a fixed datum for flange mounting and coaxial alignment with gearboxes. A plain shaft is sealed by a contact lip to block coolant or dust, and the standard housing carries this seal without auxiliary plates. The motor has a plain A-side shaft end, and the opposite end has no shaft extension, which supports inline coupling schemes in tightly arranged machine layouts.