MDD093B-N-040-N2L-110PR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911276495
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
33 Seconds
The Bosch Rexroth Indramat MDD093B-N-040-N2L-110PR0 is part of the MDD Synchronous Motors series and is designed for digital drive controllers. This motor features a nominal speed of 4000 min⁻¹, delivers a continuous torque at standstill of 14.5 Nm, and uses digital servo feedback. It has a 110 mm centering diameter, a keyway shaft with a seal, and a right-angled connector for connections.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-040-N2L-110PR0 synchronous motor is manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts drive output into mechanical rotation for positioning or velocity tasks in automated lines, packaging machinery, and material-handling stations. Its design follows the series conventions for flange dimensions, feedback format, and shaft geometry, allowing consistent installation with other motors in the platform. The unit features a keyway shaft end and uses a standard single-ended configuration without an auxiliary shaft on side B, which suits common coupling hubs and gear stages.
At standstill, the motor can deliver 14.5 Nm of continuous torque, so a servo drive can hold static loads without overheating the windings. During operation, the rotor is rated to sustain a nominal mechanical speed of 4000 rpm, which suits fast indexing and packaging axes. The motor uses frame code 093, which corresponds to the stator diameter and mounting pattern used for this size. The flange has a centering shoulder of 110 mm, giving precise radial alignment when the housing is secured to a machine plate. A factory-installed with a shaft seal arrangement protects the front bearing from lubricant washout and airborne particles. This helps the motor operate reliably in areas where dust or light contamination may be present.
Electrical and feedback conductors exit on the right side, which can simplify cable routing when the drive is mounted to the left of the motor. Rotor mass is balanced to the standard grade, which helps limit vibration during high-speed operation. The motor is supplied without a blocking brake, so a vertical axis needs an external holding device if load retention is required with power removed. Position data reaches the drive through digital servo feedback, allowing high-resolution commutation and closed-loop control. This feedback format also supports accurate speed regulation and position monitoring during dynamic motion.
Frequently Asked Questions about MDD093B-N-040-N2L-110PR0:
Q: What is the continuous torque at standstill for the MDD093B-N-040-N2L-110PR0 motor?
A: The MDD093B-N-040-N2L-110PR0 offers a continuous torque of 14.5 Nm at standstill.
Q: What type of feedback does the MDD093B-N-040-N2L-110PR0 motor use?
A: This model is equipped with digital servo feedback (DSF) for motor feedback.
Q: What type of shaft and sealing does the MDD093B-N-040-N2L-110PR0 motor feature?
A: A keyway shaft with shaft seal is provided on this motor for secure mechanical coupling and added protection.
Q: What is the centering diameter of the MDD093B-N-040-N2L-110PR0 motor?
A: The centering diameter for this model is 110 mm.
Q: Does the MDD093B-N-040-N2L-110PR0 motor have a holding brake?
A: This motor does not include a blocking brake.
