Product Description:

The MDD093B-N-040-N2L-110PL0 is a permanent-magnet synchronous motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for pairing with digital drive controllers where precise velocity and position loops are required in assembly lines, packaging machinery, and other industrial automation axes. The motor converts electrical power from the drive into mechanical rotation needed to move loads under closed-loop control. This operating principle supports stable speed regulation and repeatable positioning during continuous machine operation.

This model delivers a continuous standstill torque of 14.5 Nm, which allows static load holding without excessive heating. At its nominal speed of 4000 rpm, the torque-speed point suits many medium-inertia applications, so acceleration can be achieved without oversizing the drive. Position data is returned through Digital servo feedback (DSF), giving the controller high-resolution rotor angle information for smooth commutation and accurate motion control. The motor is supplied without a blocking brake, so any power-off holding must be provided by the machine mechanics or an external brake module. The mounting face uses a 110 mm pilot diameter to help keep the motor aligned with the driven equipment.

Wiring access uses a left-side connection because the power and feedback connections share a common orientation, which helps when multiple axes are arranged in series. A keyed connector interface supports secure mating and helps keep the phase sequence correct. Torque is transmitted through a keyway shaft, enabling positive locking to couplings or pulleys. A dedicated shaft seal helps block lubricant migration and protect the internal bearings from dust or fluid ingress. The motor also uses standard balancing, a standard housing, and motor length code B without a secondary shaft extension.