Product Description:

The MDD093B-N-040-N2L-110PB0 is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. This motor is intended for digital drive controllers where it acts as the primary rotary actuator in automated handling, printing, or assembly stations. Its task is to deliver commanded speed and torque with repeatable accuracy while fitting into the standardized mechanical envelope used across the series. That role makes it suitable for machine axes that need consistent acceleration, controlled stopping, and repeatable positioning during continuous production cycles.

The motor’s nominal speed is 4000 rpm, indicating the maximum continuous rotor velocity obtainable at rated voltage and load. A continuous standstill torque of 14.5 Nm allows the axis to hold load without overheating when motion is stopped. Integrated digital servo feedback returns high-resolution position data to the drive, forming the closed loop needed for tight velocity and position control. A centering diameter of 110 mm locates the flange precisely on the machine frame and helps reduce radial misalignment during installation. Power and feedback connectors exit on side B, so cable routing can remain on that face of the motor. The termination style uses a sealed connector, which keeps the electrical interfaces grouped at the housing.

This model is supplied without a blocking brake, so mechanical holding devices or drive torque must maintain position during power-off states. A factory-installed shaft seal limits dust and fluid ingress at the output end and supports use in enclosed industrial machinery. The output shaft is machined with a keyway, providing a positive drive interface for pulleys or couplings. Standard housing geometry, standard dynamic balancing, motor length code B, and frame size 093 keep the overall package aligned with other motors in the series and support mid-range servo axes that need predictable inertia and thermal behavior.