Product Description:

The MDD093B-N-030-N2M-130PB2 is a synchronous servo motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for mounting on production lines and test rigs, it couples with digital drive controllers to supply closed-loop motion to axis modules, pick-and-place units, and material-handling stages. The unit’s mechanical output is regulated through internal feedback signals, allowing process equipment to run repeatable duty cycles under changing load and temperature conditions.

Its operating characteristics support repeatable positioning and secure load holding during service. It sustains 14.5 Nm of continuous torque at standstill, so position holding can be maintained without overheating when the shaft is locked. Under rated excitation, it reaches a nominal speed of 3000 rpm, giving a predictable velocity reference for drive tuning. A blocking brake is fitted, and its clamping system supplies 22 Nm of static torque to secure vertical axes when power is removed. Accurate registration is aided by the 130 mm centering diameter that aligns the flange with the machine frame. Power and sensor leads exit on side B, which keeps cabling away from gearboxes mounted on the opposite face. Feedback is provided through digital servo feedback for high-resolution position control, and a plug-in connector carries phase power and sensor lines. Standard balancing helps reduce vibration during operation.

At the rotor, an integrated multi-turn absolute encoder records shaft position over multiple revolutions without a battery. The output shaft uses a keyway profile and includes a shaft seal, which helps prevent lubrication spray and fine dust from reaching the bearing set. The motor follows length code B in the 093 size class, uses a standard housing, and comes without a secondary shaft on the non-drive side, which helps reduce inertia.