MDD093B-N-030-N2M-130PA2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911250497
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
23 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-130PA2 is a motor designed for digital drive controllers and is part of the MDD Synchronous Motors series. It features a continuous torque at standstill of 14.5 Nm, a holding brake with 22 Nm torque, and includes an integrated multiturn absolute encoder. The motor has a standard housing, a centering diameter of 130 mm, and uses a connector for side A connection.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-130PA2 synchronous AC motor is produced by Bosch Rexroth Indramat and belongs to the MDD Synchronous Motors series. Engineered for digital drive controllers, it converts the regulated output of a servo amplifier into precise rotary motion for positioning tables, pick-and-place axes, and light machining spindles in automated cells. The motor is intended for closed-loop motion tasks where stable torque delivery and accurate shaft feedback are required during repeated starts, stops, and speed changes. Its compact servo design supports installation on machinery that needs responsive axis control without a large mechanical footprint.
A centering diameter of 130 mm seats the flange accurately in a mounting recess and helps maintain alignment during installation. The motor sustains 14.5 Nm of continuous torque at standstill, allowing it to hold process loads during long dwell periods without overheating. A nominal speed of 3000 rpm supports short index times while staying within the intended operating range. Cabling exits on Side A, which helps route the cable bundle toward the drive cabinet, and a single industrial connector carries both power and encoder lines. The housing uses natural convection for cooling, and the keyed shaft end supports direct coupling to pulleys or gear wheels in general automation equipment.
The blocking brake supplies 22 Nm of holding torque to secure suspended or vertical loads when power is off. Position data come from an integrated multiturn absolute encoder, enabling the controller to recover shaft angle after an interruption without losing stored position information. Signals are transmitted through digital servo feedback (DSF), which supports precise velocity and position control in the connected drive system. With frame code 093, the motor offers moderate inertia for quick acceleration, and the shaft seal helps keep coolant splash or airborne particles away from the bearings. The unit has motor length code B and is supplied without a side-B shaft end, which reduces overall length for tighter machine layouts.
Frequently Asked Questions about MDD093B-N-030-N2M-130PA2:
Q: What type of feedback does the MDD093B-N-030-N2M-130PA2 motor use?
A: The MDD093B-N-030-N2M-130PA2 features digital servo feedback (DSF) for precise motor feedback.
Q: What is the holding brake torque of the MDD093B-N-030-N2M-130PA2 motor?
A: This motor includes a blocking brake with a holding brake torque of 22 Nm.
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2M-130PA2?
A: The MDD093B-N-030-N2M-130PA2 offers a continuous torque at standstill of 14.5 Nm.
Q: What kind of encoder is included with the MDD093B-N-030-N2M-130PA2?
A: It is equipped with an integrated multiturn absolute encoder for position sensing.
Q: What type of shaft and seal does the MDD093B-N-030-N2M-130PA2 utilize?
A: The motor uses a keyway shaft with a shaft seal for secure mechanical connection and protection.
