Product Description:

The MDD093B-N-030-N2M-130GL0 is an AC synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Designed for use with digital drive controllers, it delivers closed-loop rotary motion in packaging equipment, handling systems, and general industrial machinery. Its size 093 frame and length code B give it a moderate footprint, while the standard housing and standard balancing support smooth operation. A single connector carries both power and signal connections, which helps keep wiring compact on moving axes and in cabinet installations. The motor is well suited for gantry axes, pick-and-place heads, and transfer systems that need repeatable motion with moderate inertia.

At standstill, the motor supplies a continuous torque of 14.5 Nm, so it can maintain steady output under continuous thermal load. Under rated excitation, the rotor reaches 3000 rpm, which suits fast indexing and general positioning tasks. The 130 mm centering diameter helps keep the mounting flange aligned with mating machine parts. Because it is built without a blocking brake, static holding must be provided by the drive or by an external device. Position data is transferred through digital servo feedback, allowing the controller to regulate speed and position accurately during operation.

The built-in integrated multiturn absolute encoder records shaft position over many revolutions, so the axis can report position again after power is restored. Cables leave in a left-side connector orientation, which can simplify routing where harnesses are grouped on that side of the machine. Motion is transmitted by a plain shaft on the A end only, while side B remains closed. The shaft is fitted with a shaft seal to help limit contaminant entry at the output end. The closed B end leaves no secondary shaft extension for auxiliary coupling.