Product Description:

The MDD093B-N-030-N2M-130GB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for use with digital drive controllers, it provides commanded torque and speed for automated machinery such as packaging lines, pick-and-place stations, and material-handling systems. Its 093 frame size and B length give it a moderate footprint that fits compact machine layouts while still supporting precise multi-axis motion.

At standstill, the motor can deliver up to 14.5 Nm of continuous torque, which is the maximum holding or low-speed torque it can sustain without overheating. Under rated excitation, it reaches a nominal speed of 3000 rpm, supporting high cycle rates when rapid indexing is required. The integrated blocking brake supplies 11 Nm of static torque to hold vertical or suspended loads when power is removed. A centering diameter of 130 mm provides the reference surface for face mounting and helps keep the motor aligned with the driven machine element. Power and feedback cables exit on side B, which keeps the connection direction fixed for cable routing. Standard dynamic balancing reduces residual vibration, and the housing uses the standard uncooled motor design.

Position data is returned through Digital servo feedback (DSF) with an integrated multi-turn absolute encoder, allowing accurate position tracking over multiple revolutions. Electrical termination is handled through a sealed connector rather than loose leads, which keeps the motor interface compact and orderly. The motor uses a plain shaft fitted with a shaft seal to help protect the bearing area from dust and light fluid ingress. The shaft end follows the standard single-ended arrangement, so there is no extension on side B. This layout supports reliable motion control where installation space is limited and cable access must remain predictable.