Product Description:

The MDD093B-N-030-N2M-130GA2 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed as a motor for digital drive controllers, it converts commanded current into rotary motion for automated axes in packaging, printing, and material-handling machines. The device integrates with Indramat drives to deliver closed-loop speed and position control, supplying the mechanical energy needed for precise industrial automation tasks while maintaining compatibility with standardized mounting and feedback interfaces.

The motor produces a continuous standstill torque of 14.5 Nm, allowing it to support static loads without thermal overload when the shaft is locked. During motion, it can reach a nominal speed of 3000 rpm, a value that matches many fast-cycling production lines. Accurate concentric mounting is promoted by the 130 mm centering diameter on the flange, while power and signal leads exit on side A so cabinet layouts can be planned around a single cable direction. A molded connector mates to standard drive cables, and feedback is returned through digital servo feedback (DSF) for high-resolution positioning. Standard dynamic balancing, a B length code, and a standard cast housing establish the motor’s mechanical envelope without adding special options.

Its integral blocking brake supplies 22 Nm of holding torque, enabling the axis to stay fixed during emergency stops or power-off states. Position reference is maintained by an integrated multi-turn absolute encoder, so the controller always knows the shaft angle after restart. A fitted shaft seal limits ingress of coolant or dust at the output end, and the plain shaft couples directly with clamp hubs; no secondary shaft appears on the opposite side in keeping with the standard single-ended design. Frame size 093 aligns the motor with other units in the family for uniform mounting across machines.