Product Description:

The MDD093B-N-030-N2M-130GA1 synchronous servo motor is manufactured by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts commanded current into precise rotational motion for positioning and velocity control in automated packaging lines, transfer stations, and other machinery. By combining a permanent-magnet rotor with electronic commutation, the unit supplies repeatable torque and speed response during indexing, feed, and transfer motions. This makes the motor suitable for axes that require accurate startup, stopping, and speed regulation under changing loads.

The motor produces a continuous standstill torque of 14.5 Nm, allowing loads to be held without external gearing. Its rated mechanical speed reaches 3000 rpm, matching standard servo drive frequencies. A centering diameter of 130 mm aligns the flange to machine frames and maintains concentricity during high-speed operation. Power and feedback leads exit on side A, which can simplify cable routing in multi-axis cabinets. Position data is returned through digital servo feedback (DSF), enabling the controller to close current, velocity, and position loops with high resolution. The rotor is balanced to the standard grade, and the housing uses the standard construction for this frame length.

An integrated blocking brake supplies 11 Nm of static holding torque to help prevent axis drift when the drive is disabled. Electrical power is delivered through a sealed connector that fits the series wiring harnesses. The integrated multiturn absolute encoder records position over multiple revolutions, so the axis can return to operation without a homing cycle after power loss. A plain shaft with a factory-installed shaft seal retains lubricant and helps prevent contamination while transmitting torque through couplings or pulleys. The motor has no shaft extension on side B, which leaves the rear end closed and supports compact installation.