Product Description:

The MDD093B-N-030-N2M-110PR2 is a synchronous servo motor produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Built for digital drive controllers, it supplies regulated torque and speed to industrial axes that require precise positioning. It translates controller commands into repeatable rotary motion, and the integrated blocking brake secures the load whenever the drive is disabled. This arrangement suits feed axes, handling units, and other servo applications that need accurate motion with secure stopping at standstill.

The motor can deliver a continuous standstill torque of 14.5 Nm, allowing it to hold loads without overheating during static duty cycles. Under rated excitation, it reaches a nominal speed of 3000 rpm, which fits high-speed packaging or indexing applications. Mechanical alignment to a machine frame is simplified by the 110 mm centering diameter, and factory balancing is standard to keep residual vibration low during rotation. A blocking brake rated at 22 Nm resists back-driving on vertical or suspended axes until motion is commanded. Power and feedback leads exit on the right side, which can simplify cable routing when the motor is mounted close to guards or machine frames. The housing uses the standard series design and includes a shaft seal to reduce lubricant migration and contaminant entry.

All terminations are made through a single industrial connector, reducing assembly time and helping protect electrical contacts from contamination. Rotor position is monitored by an integrated multi-turn absolute encoder, and the drive receives high-resolution motion data via digital servo feedback (DSF) for stable speed and position control. Torque is transferred through a shaft machined with a keyway, and the non-drive end remains free of output hardware. The size 093 housing with length code B fits common brackets and couplings used on existing machine assemblies.