MDD093B-N-030-N2M-110PL2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110PL2 is a motor for digital drive controllers in the MDD Synchronous Motors series. It has a nominal speed of 3000 min⁻¹ and continuous torque at standstill of 14.5 Nm. The motor is equipped with an integrated multiturn absolute encoder and features a holding brake with 22 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110PL2 is a synchronous servo motor manufactured by Bosch Rexroth Indramat and placed within the MDD Synchronous Motors series. As a motor for digital drive controllers, it converts regulated current from a drive into controlled mechanical motion, allowing positioning or velocity loops in industrial automation cells, gantries, and material-handling axes. In normal operation, the paired drive continuously adjusts current and speed so the axis can respond accurately to changing load conditions. This makes the motor suitable for repeatable motion in transfer systems, indexing equipment, and automated handling machines.
This model delivers a continuous standstill torque of 14.5 Nm, so it can hold or start loads without overheating when the shaft remains stationary. Precise mechanical centering is aided by a 110 mm centering diameter, which gives the mounting flange a repeatable datum. Under rated excitation, it reaches a nominal speed of 3000 rpm, matching applications that need high cycle rates while still benefiting from closed-loop accuracy. Power and feedback conductors terminate through a connector, and all cabling exits on the left side of the housing, which can simplify routing when several axes are installed close together. Standard rotor balancing and a standard cast housing support smooth rotation and stable heat dissipation during continuous use.
A blocking brake rated at 22 Nm locks the shaft during power-off or emergency-stop events, helping prevent drift on vertical or load-holding axes. The output shaft is machined with a keyway, allowing direct coupling to pulleys or gearboxes without custom hubs. Position feedback is supplied by an integrated multi-turn absolute encoder, and motion data are transmitted as digital servo feedback (DSF), so the controller can track rotor position across multiple revolutions. A shaft seal helps keep contamination out of the bearing chamber. The size 093 frame with motor length code B supports installation where a common mechanical envelope is required within the series.
Frequently Asked Questions about MDD093B-N-030-N2M-110PL2:
Q: What type of encoder is used in the MDD093B-N-030-N2M-110PL2 motor?
A: The MDD093B-N-030-N2M-110PL2 is equipped with an integrated multiturn absolute encoder for precise position detection.
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2M-110PL2 motor?
A: This motor provides a continuous torque of 14.5 Nm at standstill.
Q: What shaft type and seal configuration does the MDD093B-N-030-N2M-110PL2 have?
A: The shaft type features a keyway and comes with a shaft seal for added protection.
Q: Does the MDD093B-N-030-N2M-110PL2 include a holding brake, and if so, what is its torque?
A: A blocking holding brake with a torque of 22 Nm is included with this motor.
Q: What is the nominal speed of the MDD093B-N-030-N2M-110PL2 motor?
A: The MDD093B-N-030-N2M-110PL2 has a nominal speed of 3000 min⁻¹.
