Product Description:

The MDD093B-N-030-N2M-110PL1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for integration with digital drive controllers, it supplies closed-loop rotational power to automated packaging, handling, and machining equipment. It follows the 093 size code and B length classification, giving a moderate frame envelope that fits standard machine layouts. A standard housing protects the stator assembly and supports even heat dissipation during continuous operation.

Continuous performance is rated at a standstill torque of 14.5 Nm, allowing the axis to resist load without motion until commanded. During movement, the rotor can reach a nominal speed of 3000 rpm, which suits common servo applications and matches typical high-speed positioning duty. A blocking brake is fitted, and its static capability of 11 Nm helps hold vertical or suspended loads when drive power is removed. Accurate mechanical alignment is supported by a centering diameter of 110 mm, and shaft oscillations are reduced by the motor’s standard dynamic balancing. Feedback is handled through Digital servo feedback (DSF), which returns rotor position data to the controller. The motor uses a single-ended shaft without a side B extension, which simplifies coupling arrangements at the driven end.

Electrical and signal conductors are routed on the Left side of the housing through a plug-in Connector, which helps organize cable routing in compact machine spaces. Position tracking is supported by an Integrated multiturn absolute encoder that stores turn information and allows startup without a homing move after power loss. The shaft uses a keyway for torque transmission to gears or pulleys, and the shaft seal helps keep coolant spray and fine dust out of the bearing cavity.