MDD093B-N-030-N2M-110PB2 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911258983
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
44 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110PB2 is part of the MDD Synchronous Motors series and is designed for use with digital drive controllers. This motor features a continuous torque at standstill of 14.5 Nm and a nominal speed of 3000 rpm. It includes an integrated multiturn absolute encoder for feedback, a side B connector, and a holding brake with 22 Nm torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110PB2 synchronous servo motor is built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts commanded electrical power into controlled rotary motion for positioning, feed, and handling axes in automated machinery. Connector-based terminations simplify installation, while the standard housing, standard balancing, and 093 frame with length code B give the motor a practical footprint for moderate-load applications. That combination suits machine layouts that need predictable mounting dimensions without an oversized motor body.
At standstill, the motor supplies a continuous torque of 14.5 Nm without exceeding thermal limits, making it suitable for steady feed or holding duties during normal operation. At rated excitation, the rotor reaches a nominal speed of 3000 rpm, which fits common inverter speed ranges used in machine tools and automated production equipment. Power and feedback leads exit on Side B, helping keep cable routing behind the motor body. Accurate mounting is supported by a centering recess of 110 mm, and runtime position data are transmitted through Digital servo feedback (DSF). This feedback arrangement allows the connected controller to monitor motion precisely during speed and position control.
For holding functions, the internal blocking brake provides up to 22 Nm of static torque so suspended or vertical loads can remain secured when drive power is removed. This arrangement is useful where the axis must remain in place during a stop or power interruption. Position retention is supported by an integrated multi-turn absolute encoder, which preserves absolute position information across multiple shaft revolutions and reduces the need for reference travel after shutdown. Torque is transmitted through a keyway shaft profile for standard hub connections, and the motor is built with a shaft seal to help protect the front bearing area from dust and other contaminants during repeated motion cycles.
Frequently Asked Questions about MDD093B-N-030-N2M-110PB2:
Q: What is the holding brake torque provided by the MDD093B-N-030-N2M-110PB2 motor?
A: The MDD093B-N-030-N2M-110PB2 has a holding brake torque of 22 Nm.
Q: What type of encoder is included in the MDD093B-N-030-N2M-110PB2 motor?
A: This model is equipped with an integrated multiturn absolute encoder.
Q: What is the nominal speed of the MDD093B-N-030-N2M-110PB2 synchronous motor?
A: The nominal speed for this motor is 3000 min⁻¹.
Q: What kind of shaft design does the MDD093B-N-030-N2M-110PB2 use?
A: The MDD093B-N-030-N2M-110PB2 features a keyway shaft with a shaft seal for additional protection.
Q: What type of motor feedback does the MDD093B-N-030-N2M-110PB2 support?
A: This motor offers digital servo feedback (DSF) as its feedback method.
