MDD093B-N-030-N2M-110PB1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911254399
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
16 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110PB1 is a motor for digital drive controllers, featured in the MDD Synchronous Motors series. It offers a continuous torque at standstill of 14.5 Nm and a nominal speed of 3000 RPM. The motor includes a standard keyway shaft, an integrated multiturn absolute encoder, and a blocking brake with 11 Nm holding torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110PB1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. As a motor for digital drive controllers, it supplies regulated rotary motion in automated machinery, conveyor modules, and positioning axes. Standard housing and balancing allow direct mounting, while the design includes a blocking brake, a shaft seal, and a keyed shaft end. Used with compatible drives, the unit converts commanded current into precise torque, and its built-in feedback system helps the control loop maintain accurate position during repeated starts, stops, and direction changes. This makes the motor suitable for indexing tables, transfer systems, and other axes that need controlled motion under varying loads.
The motor delivers a continuous standstill torque of 14.5 Nm, so it can hold static loads without exceeding its thermal limit. A nominal speed of 3000 rpm gives the motor a common operating point for production tasks that require stable velocity and responsive acceleration. The centering shoulder measures 110 mm, giving a tight fit that helps keep the rotor aligned with connected mechanics. Cables exit on Side B, which helps keep wiring clear of the driven shaft and supports cleaner cable routing in compact machine layouts. A single sealed connector carries both power and signal conductors, which simplifies installation and removal. This arrangement also reduces the number of separate cable entry points on the motor housing. Size code 093 and length code B set the overall envelope, and the standard housing helps protect the windings from airborne contaminants.
Closed-loop control is established through digital servo feedback (DSF), which sends position data to the drive for speed and position regulation. The built-in integrated multi-turn absolute encoder retains revolution information when power is off, so the axis can return to operation without a homing routine after startup. When motion stops, a blocking brake supplies 11 Nm of static torque to hold the load in place. Output torque is transmitted through a keyway, and the installed shaft seal helps prevent oil or coolant from migrating along the shaft interface. The drive side uses a standard shaft end, while no shaft projects from the opposite face, which reduces overall length and can ease installation where rear clearance is limited.
Frequently Asked Questions about MDD093B-N-030-N2M-110PB1:
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2M-110PB1 motor?
A: The MDD093B-N-030-N2M-110PB1 offers a continuous torque at standstill of 14.5 Nm.
Q: What type of encoder is included on the MDD093B-N-030-N2M-110PB1 motor?
A: This model comes equipped with an integrated multiturn absolute encoder.
Q: How much holding brake torque does the MDD093B-N-030-N2M-110PB1 supply?
A: The holding brake provides a holding torque of 11 Nm for the MDD093B-N-030-N2M-110PB1.
Q: Where is the connection located on the MDD093B-N-030-N2M-110PB1 motor?
A: The connection direction for the electrical connector is on Side B.
Q: What shaft type and sealing features does the MDD093B-N-030-N2M-110PB1 motor have?
A: This motor uses a keyway shaft that includes a shaft seal for additional protection.
