MDD093B-N-030-N2M-110PB0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911252005
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
5 Minutes
16 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110PB0 is a motor for digital drive controllers and is part of the MDD Synchronous Motors series. It has a continuous torque at standstill of 14.5 Nm and a nominal speed of 3000 per minute. This motor features a centering diameter of 110 mm, an integrated multiturn absolute encoder, and comes equipped with a shaft seal and keyway shaft type.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110PB0 is a synchronous motor produced by Bosch Rexroth Indramat as part of the MDD Synchronous Motors series. It is intended for use with digital drive controllers, where it converts electrical input into controlled rotary motion for positioning and speed-regulated tasks in packaging lines, gantry axes, and similar automated equipment. Its synchronous design allows the drive to regulate torque and speed with precise phase control, which suits indexing, feed motion, and other repeatable axis duties. The motor is built for closed-loop motion applications that require accurate response during repeated starts, stops, and speed changes.
At standstill, the motor can deliver 14.5 Nm of continuous torque, allowing it to maintain load control without overheating during short periods of zero speed. The rotor is rated for a nominal speed of 3000 rpm, which supports fast cycle times in dynamic axis applications. All electrical and feedback connectors are located on side B, which can simplify cable routing when the flange is mounted against a machine frame. Accurate concentric alignment is supported by a 110 mm centering diameter, and standard balancing helps limit vibration during operation. This connector layout can also reduce cable bending near the motor body.
Position information is returned through Digital servo feedback (DSF) together with a multi-turn absolute encoder, so the drive can read rotor position across multiple revolutions without a homing cycle at startup. This feedback arrangement supports precise commutation and stable position control throughout normal operation. Mechanical power is transmitted through a keyway shaft, and the output end is supplied with a shaft seal to help protect the bearing area from contamination. The motor is supplied without a blocking brake, so any holding function after power removal must be provided by the control system or by an external holding device. Connector-based terminals keep the wiring arrangement compact, and the housing uses the standard enclosure style for this motor line without an opposite-side shaft extension.
Frequently Asked Questions about MDD093B-N-030-N2M-110PB0:
Q: What is the continuous standstill torque of the MDD093B-N-030-N2M-110PB0 motor?
A: This motor provides a continuous torque of 14.5 Nm at standstill.
Q: What type of encoder is equipped on the MDD093B-N-030-N2M-110PB0 motor?
A: The MDD093B-N-030-N2M-110PB0 comes with an integrated multiturn absolute encoder.
Q: What shaft features are available on the MDD093B-N-030-N2M-110PB0 motor?
A: A shaft with keyway and a shaft seal is used in this model for secure power transmission.
Q: Where is the connection direction located on the MDD093B-N-030-N2M-110PB0 motor?
A: The connection direction for this motor is located on side B.
Q: Is a holding or blocking brake included with the MDD093B-N-030-N2M-110PB0 motor?
A: This model does not include a blocking brake.
