MDD093B-N-030-N2M-110PA1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911262016
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
6 Minutes
15 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110PA1 is a motor with a nominal speed of 3000 rotations per minute and a continuous torque at standstill of 14.5 Nm. Part of the MDD Synchronous Motors series, it features an integrated multiturn absolute encoder and digital servo feedback. This standard housing motor has a centering diameter of 110 mm and includes a blocking brake with 11 Nm holding brake torque.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110PA1 synchronous motor is produced by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Designed for digital drive controllers, it converts controlled electrical input into precise rotary motion for automated axes, conveyors, and positioning tables in industrial machinery. The unit works with compatible drives to provide the closed-loop response needed for coordinated multi-axis motion. Its synchronous design supports responsive changes in speed and position as command values change. That behavior is useful on machines that alternate between short indexing moves and continuous travel.
The motor has a continuous standstill torque of 14.5 Nm, allowing stable holding force during dwell periods without overheating. Once in motion, it reaches a nominal speed of 3000 rpm, which supports repeatable cycle times in automated systems. For rapid stops, a factory-installed blocking brake provides up to 11 Nm of static torque to hold position when power is removed. Position data comes from an integrated multi-turn absolute encoder, and the electromagnetic package uses frame size 093 for a balance of acceleration capability and load capacity. The encoder allows the connected drive to retain position information across multiple revolutions during normal operation.
The end bell has a centering recess of 110 mm, which helps align the motor with gearboxes or machine plates. Power and feedback leads exit on side A, and the motor uses a plug-in connector interface that simplifies cable attachment. Signal transmission uses digital servo feedback (DSF), which helps the drive maintain accurate position data during operation. A shaft seal limits lubricant migration, and the machined shaft end uses a keyway for standard keyed couplings. This layout helps keep cable routing orderly where the motor is mounted close to guards, frames, or adjacent axes.
Frequently Asked Questions about MDD093B-N-030-N2M-110PA1:
Q: What is the continuous torque rating of the MDD093B-N-030-N2M-110PA1 motor at standstill?
A: This motor provides a continuous torque of 14.5 Nm at standstill, supporting demanding drive applications.
Q: What type of encoder is included with the MDD093B-N-030-N2M-110PA1 motor?
A: The MDD093B-N-030-N2M-110PA1 is equipped with an integrated multiturn absolute encoder for accurate position feedback.
Q: What is the holding brake torque on the MDD093B-N-030-N2M-110PA1 motor?
A: A blocking brake with 11 Nm of holding torque is built into this model for secure stopping.
Q: Where is the electrical connection located on the MDD093B-N-030-N2M-110PA1 motor and what type is it?
A: The connection is positioned on Side A and utilizes a connector for secure electrical interfacing.
Q: What type of shaft and sealing does the MDD093B-N-030-N2M-110PA1 motor provide?
A: This motor features a keyway shaft with a shaft seal for protected and reliable coupling.
