MDD093B-N-030-N2M-110GR0 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
MPN: R911277170
No Tariffs On US Orders- Straightforward Pricing: No Rush Fees, No Credit Card Fees
Current response time:
3 Minutes
37 Seconds
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110GR0 is a motor from the MDD Synchronous Motors series, designed for digital drive controllers. It offers a continuous torque at standstill of 14.5 Nm and has a nominal speed of 3000 min⁻¹. This motor features an integrated multiturn absolute encoder and digital servo feedback, with a plain shaft and a centering diameter of 110 mm.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The MDD093B-N-030-N2M-110GR0 is a synchronous servo motor built by Bosch Rexroth Indramat within the MDD Synchronous Motors series. Intended for use with digital drive controllers, it converts controlled three-phase current into precise rotary motion for packaging lines, material-handling axes, and general machine-tool positioning tasks in industrial automation. In automated systems, it serves as the rotary output element for axes that need repeatable motion during indexing, feeding, and positioning cycles. The motor is designed for applications where dynamic response and positional accuracy are critical. That operating role makes it suitable for servo axes that must accelerate quickly and stop accurately without relying on open-loop control.
During continuous operation at standstill, the unit can deliver a torque of 14.5 Nm, allowing it to support static loads without overheating. Its nominal synchronous speed of 3000 rpm sets the rated operating speed under normal conditions. The mechanical interface uses a plain shaft, so pulleys or backlash-free couplings can mount directly without a keyway. Rotor angle and absolute revolution count are monitored by an integrated multi-turn absolute encoder, and position data is transmitted through digital servo feedback so the drive can regulate current in real time. This feedback arrangement lets the controller determine shaft position immediately after startup and maintain stable speed control through load changes.
The frame is aligned to the machine plate by a 110 mm centering diameter, which helps simplify concentric installation and reduce radial runout. The motor is supplied without a blocking brake, so holding torque during power loss must come from the drive or an external clamp. Cabling exits on the right side, matching panel layouts where cable trays run along that edge. Factory-provided standard balancing helps limit residual vibration during operation. The sealed shaft and connector-type terminals keep the installation compact and support use in areas with light coolant spray or airborne particulates.
Frequently Asked Questions about MDD093B-N-030-N2M-110GR0:
Q: What type of encoder is included in the MDD093B-N-030-N2M-110GR0 motor?
A: The MDD093B-N-030-N2M-110GR0 features an integrated multiturn absolute encoder for position sensing.
Q: What is the continuous torque at standstill specification of the MDD093B-N-030-N2M-110GR0?
A: This motor delivers a continuous torque at standstill of 14.5 Nm.
Q: Is a holding brake included with the MDD093B-N-030-N2M-110GR0 motor?
A: The MDD093B-N-030-N2M-110GR0 operates without a blocking brake installed.
Q: What motor feedback system does the MDD093B-N-030-N2M-110GR0 use?
A: This model is equipped with digital servo feedback (DSF) for motor control.
Q: What is the nominal speed of the MDD093B-N-030-N2M-110GR0 synchronous motor?
A: The nominal speed of the MDD093B-N-030-N2M-110GR0 is rated at 3000 min⁻¹.
