Product Description:

The MDD093B-N-030-N2M-110GL2 is a synchronous AC servo motor manufactured by Bosch Rexroth Indramat and supplied as part of the MDD Synchronous Motors series. Classified as a motor for digital drive controllers, it serves as the electromechanical link between the inverter power stage and the moving machine element. In automated production lines, the unit delivers commanded position and velocity profiles that stay coordinated with other axes for accurate tooling, conveying, or pick-and-place motion. Its design suits closed-loop applications where repeatable rotary motion is required over long operating cycles.

At standstill, the motor produces a continuous torque of 14.5 Nm, allowing stable force output without overheating. During deceleration or an emergency stop, its integrated blocking brake supplies up to 22 Nm of holding torque. Rated mechanical speed reaches 3000 rpm, matching the inertia of medium-size loads driven by the 093 frame. A centering diameter of 110 mm aligns the housing to the machine plate, while the rotor uses standard balancing to limit vibration during operation. Electrical and feedback conductors exit on the left side through a sealed connector interface, and the housing includes a shaft seal to help reduce lubricant leakage and contaminant entry.

The drive controller verifies rotor position through an integrated multiturn absolute encoder, and position data is returned as digital servo feedback so the control loop can maintain accurate motion after power cycling. Mechanical power is transferred through a plain shaft with only the A-side machined, while the opposite end remains unmachined to preserve rotor balance. The installation length corresponds to code B, and service wiring mates to a keyed connector for secure electrical attachment. This arrangement supports use on synchronized gantries, indexing tables, and other axes that require dependable motion with absolute position feedback.