MDD093B-N-030-N2M-110GL1 Bosch Rexroth Indramat
Wake Industrial LLC is not an authorized distributor of this product.
- Straightforward Pricing: No Rush Fees, No Credit Card Fees
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110GL1 is part of the MDD Synchronous Motors series and is designed as a motor for digital drive controllers. It provides 14.5 Nm of continuous torque at standstill and features an integrated multiturn absolute encoder for motor feedback. The motor includes a holding brake with 11 Nm torque, has a plain shaft with shaft seal, and uses a connector with the connection direction set to the left.
To contact sales for pricing and lead time:
Payment Methods
Shipping Methods
Our Credentials
Product Description:
The Bosch Rexroth Indramat MDD093B-N-030-N2M-110GL1 belongs to the MDD Synchronous Motors series and functions as a motor for digital drive controllers used in precise industrial automation axes. The model uses a standard housing that fits typical machine layouts and has a plain shaft only on the drive side, with no shaft end on side B for auxiliary couplings. Its integrated multi-turn absolute encoder works with the feedback system so the drive can track position over multiple revolutions without losing count, which supports accurate motion on coordinated multi-axis equipment. This arrangement also helps the controller maintain reliable position data during indexing, synchronized travel, and repeated start-stop cycles.
In continuous duty, the motor can supply 14.5 Nm of torque at standstill, providing enough static force to support holding tasks before motion begins. Once rotating, it reaches a nominal speed of 3000 rpm, which suits drive systems intended for high-speed synchronous operation. A blocking brake integrated on the rear end provides 11 Nm of holding torque to secure vertical loads during power loss or a stopped condition. Mechanical alignment is aided by a centering diameter of 110 mm, which helps the flange seat accurately against the machine surface. Position data is transmitted through Digital servo feedback (DSF), allowing the drive to receive absolute feedback information in real time for closed-loop control.
The electrical and feedback wiring enter through a left-side connector, which helps keep cable routing compact in tight installations. The motor is built in length code B and size 093, giving it a compact frame that still supports the winding and brake arrangement used by this model. Balance quality is set to a standard grade for normal operating speeds, and a factory-installed shaft seal helps protect the front bearing from coolant splash. The plain shaft works with common clamping couplings, making it suitable for machines that do not require a keyed output shaft.
Frequently Asked Questions about MDD093B-N-030-N2M-110GL1:
Q: What is the continuous torque at standstill for the MDD093B-N-030-N2M-110GL1 motor?
A: The MDD093B-N-030-N2M-110GL1 motor supports a continuous torque at standstill of 14.5 Nm, making it capable of sustained load holding.
Q: What type of encoder is used in the MDD093B-N-030-N2M-110GL1 motor?
A: This motor uses an integrated multiturn absolute encoder for accurate position feedback.
Q: Does the MDD093B-N-030-N2M-110GL1 motor have a holding brake and what is its torque?
A: A holding brake with a torque rating of 11 Nm is included on this model.
Q: What feedback system is incorporated in the MDD093B-N-030-N2M-110GL1 motor?
A: The MDD093B-N-030-N2M-110GL1 is equipped with digital servo feedback (DSF) for motor operation.
Q: What is the nominal speed of the MDD093B-N-030-N2M-110GL1?
A: The nominal speed for this model is specified at 3000 min⁻¹ for standard applications.
