Product Description:

The MDD093B-N-030-N2M-110GL0 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MDD Synchronous Motors series. Intended for use with digital drive controllers in automated production equipment, it delivers regulated torque and speed for coordinated linear or rotary motion on packaging, handling, and machining axes. This model has the 093 size code and B length designation, uses standard rotor balancing, and is built in a standard housing that supports installation in established mounting spaces. Its synchronous design helps the axis respond quickly to speed and position commands during repetitive motion cycles.

Dynamic performance is rated at a continuous standstill torque of 14.5 Nm and a nominal speed of 3000 rpm. These ratings describe the continuous output the motor can sustain while the windings remain within thermal limits. Position control uses digital servo feedback (DSF) signals from the motor's integrated multiturn absolute encoder, so the controller receives rotor position data for closed-loop motion and retains multi-turn position information after power cycles. This feedback arrangement supports precise positioning and coordinated motion without separate external measuring hardware. A centering pilot of 110 mm helps seat the flange concentrically on the machine face and supports accurate alignment during operation.

Cabling enters from the left side, and the power and encoder leads use a sealed connector for attachment. This arrangement can simplify routing when the cable path approaches the motor from that direction, and the sealed connection point keeps cable attachment compact around the housing. The shaft is equipped with a shaft seal, which helps reduce lubricant ingress at the drive end. The motor is supplied without a blocking brake, so an external holding device is needed if the axis must remain fixed when power is removed. A plain single-ended shaft transmits torque to the driven load, and the absence of a second shaft end helps keep the overall motor length compact.