Product Description:

Bosch Rexroth Indramat manufactures the MDD093B-N-030-N2M-110GB2, a synchronous AC servo motor in the MDD Synchronous Motors series. As a motor for digital drive controllers, it drives axes that require precise velocity and position control in automated machinery. The unit converts drive current into mechanical rotation so linear or rotary actuators can follow programmed motion profiles. Its integrated multi-turn absolute encoder returns position data directly to the controller, enabling closed-loop regulation without external transducers. This arrangement supports repeatable motion in packaging, handling, and other industrial automation tasks where accurate axis feedback is required throughout the operating cycle.

At stall, the motor delivers a continuous torque of 14.5 Nm, allowing it to support steady load forces while remaining within its thermal limits. The nominal speed is 3000 rpm, which suits fast servo applications that still need stable feedback control. Mechanical alignment is aided by a 110 mm centering diameter, and the cable outlet is located on side B of the housing. Power and feedback connections use a connector interface, keeping the electrical link compact at the machine interface. Motion data are returned through Digital servo feedback (DSF), allowing the controller to track rotor position and speed with short update times.

A blocking brake supplies 22 Nm of holding torque when the power stage is disabled, helping the axis remain stationary at rest. The rotor uses a standard balance grade, and the stator housing has a standard design for general-purpose mounting arrangements. The motor has length code B and a frame size of 093. Its output uses a plain shaft with a shaft seal to help keep lubricant in the bearing area while limiting contaminant entry, and there is no shaft end on the opposite side.